[1]Cheng Fan, Kun Xu, Lei Zhang, Qiang Yuan, Qian Wang, Kejun Wang,LiningSun.Kinematicplanning andin-situmeasurement ofseven-axisfive-linkagegrinding andpolishingmachinetool forcomplexcurvedsurface.Machining Science and Technology,2022, 26 (2):203-228.（通讯作者）
[2] Lei Zhang, Chen Ding, Cheng Fan, Qian Wang, Kejun Wang. Process planning of the automatic polishing of the curved surface using a five-axis machining tool. International Journal of Advanced Manufacturing Technology2022, 120 (11-12):7205-7218.（第一作者）
[3]Cheng Fan,Yucheng Xue,Lei Zhang,Qizhi Zhao, Yao Lu, Qian Wang.Investigation into theerrorcompensationmethod of thesurfaceform based onfeedrateoptimizationindeterministicpolishing. Machining Science and Technology, 2021, 25（1）：31-51.（通讯作者）
[4]Lei Zhang,Qizhi Zhao,Cheng Fan. Dwell time algorithm in deterministic polishing of a free-form surface based on the continuous tool influence function. Applied Optics, 2021, 60（9）：2704-2715.（第一作者，通讯作者）
[5]Cheng Fan, CaoyangXue,Lei Zhang,Kejun Wang, Qian Wang, Yapeng Gao, Lei Lu. Design and control of the belt-polishing tool system for the blisk finishing process.Mechanical Sciences, 2021, 12（1）：237-248.（通讯作者）
[6]Cheng Fan, Yigang Chen, Yucheng Xue，Lei Zhang.Study on theelectrorheologicalultra-precisionpolishingprocess with anannularintegratedelectrode. Micromachines, 2021, 12 (10): 1235.（通讯作者）
[7]Qian Wang, Kun Xu, Cheng Fan, Lining Sun, Lei Zhang, Kejun Wang.Research on material and morphological structure of Venus flytrap trigger hair. Journal of Bionic Engineering, 2021, 18 (5): 1126-1136.（通讯作者）
[8]Cheng Fan,Yao Lu, Kejun Wang, Qian Wang, Yucheng Xue, Lei Zhang. Surface removalcharacteristicof computer-controlled dual-rotor polishing. International Journal of Advanced Manufacturing Technology, 2020，111（7-8）: 2189-2199（通讯作者）
[9] Lei Zhang, Chen Ding, Cheng Fan, Qiang Yuan, Qian Wang, Kejun Wang. Interference analysis and simulation of abrasive belt grinding and polishing of blisk. Advances in Mechanical Engineering, 2020, 12 (12):1687814020984394.（第一作者）
[10]Yucheng Xue, Qian Wang,Cheng Fan,Kejun Wang,Lei Zhang,Yao Lu. Theoretical research on surface material migration of field constrained abrasivepolishing. AIP Advances, 2020, 10（12）：125215.（通讯作者）
[11] Yanjun Han, Wu-Le Zhu, Lei Zhang, Anthony Beaucamp. Region adaptive scheduling for time-dependent processes with optimal use of machine dynamics. International Journal of Machine Tools and Manufacture, 2020, 156:103589.（通讯作者）
[12] Yanjun Han, Fang Duan, Wule Zhu, Lei Zhang, Anthony Beaucamp. Analytical and stochastic modeling of surface topography in time-dependent sub-aperture processing. International Journal of Mechanical Sciences, 2020, 175:105575.（通讯作者）
[13]Cheng Fan, Lei Zhang, Qizhi Zhao, Jun Zhao,Ji Zhao，Lining Sun.Modeling and optimization of materialremoval influenced by sliding velocityin polishing.Proceedings of the Institution of Mechanical Engineers,PartBJournal of Engineering Manufacture. 2019, 233（4）：1127-1135.（通讯作者）
[14] Qizhi Zhao, Lei Zhang, Yanjun Han, Cheng Fan. Polishing path generation for physical uniform coverage of the aspheric surface based on the Archimedes spiral in bonnet polishing.Proceedings of the Institution of Mechanical Engineers,PartBJournal of Engineering Manufacture. 2019, 233（12）：2251-2263.（通讯作者）
[15] Qizhi Zhao, Lei Zhang, Cheng Fan. Six-directional pseudorandom consecutive unicursal polishing path for suppressing mid-spatial frequency error and realizing consecutive uniform coverage. Applied Optics, 2019, 58（31）：8529-8541.（通讯作者）
[16] Cao Xiaowen, Lu Yiming, Fan Hua, Xia Hong, Zhang Lei，Zhang Yonglai.Wet-etching-assisted femtosecond laserholographic processing of a sapphire concavemicrolens array. Applied Optics., 2018, 57（32）：9604-9608.（通讯作者）
[17]Yanjun Han, Lei Zhang , Cheng Fan , Wule Zhu and Anthony Beaucamp.Theoretical Study of Path Adaptability Based onSurface Form Error Distribution in Fluid Jet Polishing. Applied Sciences, 2018, 8（10）：1814.（通讯作者）
[18] Lu Lei, Zhang Lei, Ji Shijun, Song Dunlan, Zhao Ji.A segmentfeedrate profile fittingmethod for parametric interpolation.Proceedings of the Institution of Mechanical Engineers,PartBJournal of Engineering Manufacture. 2018, 232（2）: 267-280.（通讯作者）
[19] Lu Lei, Zhang Lei, Gu Yan, Zhao Ji.Fast parametric curve interpolationwith minimal feedrate fluctuation bycubic B-spline.Proceedings of the Institution of Mechanical Engineers,PartBJournal of Engineering Manufacture. 2018, 232（9）: 1642-1652（通讯作者）
[20] Han Yanjun, Zhang Lei, Guo Ming, Fan Cheng, Liang Fusheng. Tool paths generation strategy for polishing of freeform surface with physically uniform coverage. International Journal of Advanced Manufacturing Technology, 2018, 95（5-8）：2125-2144.（通讯作者）
[21] Wansong Zhou, Lei Zhang, Cheng Fan, Tianqi Gu and Ji Zhao. Investigation into material removal influenced by edge effect in polishing. Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture.2017,231(8):1409-1422（通讯作者）
[22]Dengpeng Huang, Lei Zhang,Shijun Ji and Ji Zhao.Tool path generation for ultra-precision polishing of freeform optical surfaces in an off-axis three-mirror imaging system.Proceedings of the Institution of Mechanical Engineers,PartBJournal of Engineering Manufacture. 2017, 231(5): 814-824（通讯作者）
[23] Lu Lei, Zhang Lei, Gu Yan, Zhao Ji.A parametric interpolation methodwith minimal feedrate fluctuationby nonuniform rational basis spline.Proceedings of the Institution of Mechanical Engineers,PartCJournal of Mechanical Engineering Science, 2017，231（18）：3301-3317.（通讯作者）
[24] Lei Zhang, Yanjun Han, Cheng Fan, Ye Tang, Xunpeng Song. Polishing path planning for physically uniform overlap of polishing ribbons on freeform surface. International Journal of Advanced Manufacturing Technology, 2017, 92（9-12）：4525-4541.（通信作者）
[25]Lei Zhang, Dengpeng Huang, WansongZhou, Cheng Fan, Shijun Ji,Ji Zhao.Corrective polishing of freeform optical surfaces in an off-axisthree-mirror imaging system. International Journal of Advanced Manufacturing Technology, 2017, 88（9-12）: 2861-2869.（通信作者）
[26] Lu Lei, Zhang Lei, Ji Shijun, Han Yanjun, Zhao Ji. An offline predictive feedrate scheduling method for parametric interpolation considering the constraints in trajectory and drive systems. International Journal of Advanced Manufacturing Technology, 2016, 83（9）: 2143-2157.（通讯作者）
[27]Wansong Zhou, Lei Zhang, Cheng Fan, Ji Zhao and Yapeng Gao.Development of a real-time forcecontrolledcompliant polishing toolsystem with online tuning neuralproportional–integral–derivativecontroller.Proceedings of the Institution of Mechanical Engineers,Part I:Journal ofSystems and Control Engineering, 2015, 229 (5)：440-454.（通讯作者）
[28] Zhang Lei, Gu Tianqi, Zhao Ji, Ji Shijun, Sun Qingzhou, Hu Ming. An adaptive moving total least squares method for curve fitting. Measurement, 2014, 49: 107-112.（第一作者，通信作者）
[29]Fan Cheng, Zhao Ji, Zhang Lei, Yoke San Wong, Geok Soon Hong, Zhou Wansong.Modeling and analysis of the material removal profile for free abrasive polishing with sub-aperture pad.Journal of Materials Processing Technology,2014,214 (2):285-294.（通讯作者）
[30] Lei Zhang, Tianqi Gu, Ji Zhao, Shijun Ji, Ming Hu, Xiangbo Li. An improved moving least squares method for curve and surface fitting. Mathematical Problems in Engineering, 2013, Article ID 159694, 1-6.（第一作者，通信作者）
[31]Zhang Lei，He Xin-sheng, Yang He-ran, Zhang Ying, An integrated tool for five-axis electrorheological fluid-assisted polishing, International Journal of Machine Tools and Manufacture, 2010,50（8）：737-740.（第一作者，通信作者）
[32]Zhang Lei, Zhao Yun-wei, et al.An investigation of effective area in electrorheological fluid-assisted polishing of tungsten carbide.International Journal of Machine Tools and Manufacture,2008,48(3-4):295-306.（第一作者，通信作者）
[33]Zhang Lei, Zhang Lifeng, Li Daqi, Kuriyagawa Tsunemoto. Finite element analysis of powder blasting process. Proceedings of the 9th International Symposium on Advances in Abrasive Technology (ISAAT 2006) , 283-288.（第一作者，通信作者）
[34]Zhang Lei, Kuriyagawa Tsunemoto, Kaku Tsuyoshi, Zhao Ji. Investigation into electrorheological fluid-assisted polishing. International Journal of Machine Tools and Manufacture, 2005, 45 (12-13): 1461-1467.（第一作者，通信作者）
[35]Zhang Lei, Kuriyagawa Tsunemoto, Yasutomi Yuya, Zhao Ji. Investigation into micro abrasive intermittent jet machining. International Journal of Machine Tools and Manufacture, 2005,45 (7-8): 873-879.（第一作者，通信作者）
[36]Zhang Lei, Zheng Li. Prediction of cutting forces in end milling of pockets. The International Journal of Advanced Manufacturing Technology, 2005, 25 (3-4): 281-287.（第一作者，通信作者）
[37]Zhang Lei, Zheng Li, Prediction of cutting forces in milling of circular corner profiles, International Journal of Machine Tools and Manufacture, 2004, 44(2/3), 225－235.（第一作者，通信作者）
[38] Zhang Lei, Tam H Y, Prediction of Material Removal in Polishing Free-Form Surfaces with Fixed Abrasives, Key Engineering Materials, 2004, 257/258, 423－428.（第一作者，通信作者）
[39] Zhang Lei, Zheng Li, Zhang Zhihai, An investigation of cutting forces in horizontal-mode peripheral milling of curved surfaces, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 2003, 217(7), 961－976.（第一作者，通信作者）
[40] Zhang Lei, Tam H Y, Yuan Chuming, Chen Youping, Zhou Zude, An investigation of material removal in polishing with fixed abrasives, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 2002, 216(1), 103－112.（第一作者，通信作者）
[41] Zhang Lei, Tam H Y, Yuan Chuming, Chen Youping, Zhou Zude, Zheng Li, On the removal of material along a polishing path by fixed abrasives, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 2002, 216(9), 1217－1225.（第一作者，通信作者）
[42] Zhang Lei, Zheng Li, Zhang Zhihai, Liu Yin, Li Zhizhong, On cutting forces in peripheral milling of curved surfaces, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 2002, 216(10), 1385－1398.（第一作者，通信作者）
